The date of payment from buyers deliver within days
This type product is suitable for conferencing room, office desk, cabinet calling, board, showing room, decoration of family, stage or other places, which integrates power socket and the light current interface in the same product. It will be hidden under the desk, only occupies 85mm circle hole of table. The body of this product uses high-quality aluminum treatment with anodizing. It is mat black and easy to clean.
1. The electricity protection:
Effectively protect for accidentally touch of the products caused by frequent lifting and lowering. Child protection is taken into account by this design.
2. The anti-pinch protection:
It can stop moving if meets any barrier when the unit is in the falling moving, it can prevent being jammed broken or hurt.
3. The anti-collision protection:
It can stop rising if meets any barrier when the unit is in the rising moving, it can prevent being collided damaged.
4. Push button to control down and up:
Push button can avoid the wrong operation to open or close when user to clean the product by touching the surface.
5. IP44 waterproof design:
The structure design is for solving the problem which not in the closing condition to cause the leakage danger of moisture.
6. Arbitrary combinations:
It can be according to the customer requirements, choose a variety of socket combination (2 sockets with 2 USB ports, 3 sockets with 2 USB ports and wireless charger optional).
7. With USB charging function and wireless charger on top:
The product is with 5V power supply, equipped with USB interface for mobile phone charging.
Wireless charging on top is 5V 1A and the wireless charging is certified safe and work with any phone that has QI charging technology, such as iPhone 8 and above, Samsung Galaxy 6 and above, and Samsung Note 5 and above, etc.
8. Stop at any where you want
The push button can stop at any where you want, if you only want to use USB charge or use only one socket.
Optional outlet components:
Top cover’s color for chosen:
2.Kitchen cook island
Prior to Installation:
•Contact a local electrical inspector to make sure that this product meets or exceeds all local electrical codes
•Make sure there is adequate space to install (see below: CUT OUT AND MOUNTING STEPS)
•Disconnect and turn off all power sources.
•For indoor use only.
•This product is designed for countertops, desktops, and similar surfaces (this product is not suitable for floor use).
•We suggest only licensed, insured, and bonded electrical contractors should install this product.
•These products have no filed serviceable parts. If the product is damaged, it must be returned to the factory. Any attempt to alter this product in any way may cause electrocution.
•Supplier accepts no responsibility if the above conditions are not followed.
Cutout and Mounting Steps:
•Select the desired location of the countertop or desktop, at least 26mm from stove top or other heating sources.
•The selected location must be at least 20mm away from the edge of the countertop or similar surface.
•The mounting surface can be between 5mm and 45mm thickness.
Steps to Installation:
1. Cut hole in surface of countertop 85mm.
2. Remove round plastic threaded locking part from the product.
3. Feed power cord through hole in countertop first, followed by the product, pushing down until the top flat on countertop.
4. Screw the round locking part to the body and until it locked tight in place.
5. Plug power cord into electrical outlet box underneath countertop.
6. To open pop up feature, press the power remark on cover. It will be motorized raise to use the outlet and USB power.
7. To hidden the socket, push the button on top again, it will be motorized closed.